Dynacord Cms1000-3 Mixing Desk

Channels (Mono + Stereo) 10 mic (6 mic/line + 4 mic / stereo line

Auxiliaries (MON, FX, AUX) 2 Pre, 2 Post, 2 Pre/Post switchable

MIC GAIN (Mono / Stereo) 0 to +60 dB / +10 to +60 dB

LINE/CD/USB GAIN (Stereo) -10 to +20 dB

THD, at 1 kHz, MBW = 80 kHz

MIC input to Master A L/R outputs, +16 dBu, typical < 0.005%

Frequency Response, -3 dB, ref. 1 kHz, any input to any Mixer output 15 Hz to 70 kHz

Crosstalk, 1 kHz

Fader & FX/AUX/MON-Send attenuation > 85 dB

Channel to Channel < -80 dB

CMRR, MIC input, 1 kHz > 80 dB

Input Sensitivity, all level controls in max. position MIC / LINE (Mono) / LINE (Stereo) / CD (Stereo) -74 dBu (155 µV) / -54 dBu (1.55 mV) / -34 dBu (15.5 mV) / -34 dBu (15.5 mV)

Maximum Level, mixing desk

MIC inputs +21 dBu

Mono Line inputs / Stereo Line inputs +41 dBu / +30 dBu

All other inputs +22 dBu

All other outputs +22 dBu

Input Impedances

MIC / Insert Return 2 ㏀ / > 3.3 ㏀

2Track Return & CD In 10 ㏀

All other inputs > 15 ㏀

Output Impedances

Phones 47 Ω

All other outputs 75 Ω

Equivalent Input Noise, MIC input, A-weighted, 150 ohms -130 dBu

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master fader down -97 dBu

Master fader 0 dB, Channel fader down -91 dBu

Master fader 0 dB, Channel fader 0 dB, Channel gain unity -83 dBu

Equalization

LO Shelving ±15 dB / 60 Hz

MID Peaking, mono inputs ±15 dB / 100 Hz to 8 kHz

MID Peaking, stereo inputs ±12 dB / 2.4 kHz

HI Shelving ±15 dB / 12 kHz

Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz) ±10 dB / Q = 1.5 to 2.5

Power Consumption

without lamp / with lamp 45 W / 50 W

Filter: LO-CUT, mono inputs f = 80 Hz, 18 dB/oct.

VOICE FILTER, mono inputs switchable

FEEDBACK FILTER, MON 1/2 70 Hz to 7 kHz, Notch, -9 dB

Effects type, effects presets Dual stereo 24/48-bit multi effects processors, 100 Factory + 20 User, Tap-Delay

Remote control Footswitch, MIDI

Display 128 x 64 pixels, OLED

Digital Audio Interface: Channels 4 In / 4 Out

AD/DA Conversion, Sampling Rate 24-bit, 44.1 / 48 / 88.2 / 96 kHz

PC Interface USB2.0, Female Type B

Supported OS See documentation on dynacord website

MIDI Interface 5-pin DIN connector, In / Out

Protection

Mixer Outputs (Relay controlled) MON 1, MON 2, MASTER A

Switching Mode Power Supply (µC controlled) Mains Over/Undervoltage, High Temperature

Phantom Power, switchable in groups 48 V DC

Power Requirements (SMPS with auto range mains input) 100 V to 240 V AC, 50 Hz to 60 Hz

Dimensions, mm 510.5 x 155 x 498.5 Rack-mount: 483.0 x 135.0 x 443.7

Device in rated condition, unity gain (MIC gain 20 dB), all faders position 0 dB, all pots in mid position, master fader +6 dB, unless otherwise noted.