HW Audio:. Adastra CS4 Call Station For RM244V CS4 (953.146UK)

Adastra CS4 Call Station For RM244V CS4 (953.146UK)

Free Shipping

List price: ~~£159.00~~

Our Price: £ 149.00

Call Station for RM244V Mixer Amplifier

Paging microphone with call station base for use with the RM244V mixer-amp. Connected via RJ45 for both signal and power to simplify wiring.

Zone assign buttons enable calling to one or all zones.

Pressing the page button mutes all audio playback and plays one of 8 selectable chimes, opening the microphone to the selected zone(s).

Pressing the reset button mutes the microphone and resumes background music playback to all zones.

This system offers 4-zone paging without the additional cost of using a quad amplifier.

For use ONLY with the RM244V amplifier (953.244UK)
Assignable to individual or all 4 zones
8 selectable chime settings

3.5mm aux input
Up to 1km remote wiring over CAT5
Supplied with 1m RJ45 patch lead

Power supply 24Vdc, 500mA from RJ45 or optional adaptor
Max. connection length100m (CAT5 cable) or 1km with optional 24Vdc adaptor
Capsule Back electret condenser
Polar pattern Cardioid
Controls Aux/Mic/Chime levels, chime DIP switches, zone/page buttons
ConnectorsRJ45 to amplifier, 24Vdc power jack, 3.5mm aux in
Frequency response : -3dB150Hz - 22kHz
Input level Mic: -46dBV, Aux: -10dBV

Input impedance Mic: 600 Ohms, Aux: 50k Ohms
Output level 10dBV
Output impedance : balanced600 Ohms
S/N ratio-60dB (all channels selected)
InterfaceRS-485 control
Zone assign4 zones or all selectable
Dimensions460 x 140 x 115mm
Weight 670g

Connecting a CS4 call station
The CS4 call station is a bespoke optional addition to the RM244V system and up to 2 of these can
be connected to a single amplifier by RJ45 with CAT5 network cable. This is not a standard LAN
connection and should only be connected directly to the RM244V.
The CS4 call station comprises a base unit and paging microphone. Connect the microphone to the
XLR input on top of the base unit.
Connect the RJ45 connector on the rear panel of the CS4 to one of the RJ45 inputs on the rear of the
RM244V. The CAT5 cable carries power to the CS4 and control and audio signals to the RM244V.
If the CAT5 cable run is further than 100m, it will be necessary to connect 24Vdc power to the DC
jack of the CS4 for operation up to 1000m cable length.