Audio Technica AT2020, Large Diaphragm Condenser mic.
Ideal for project studios, podcasting etc.
Connect this up to a soundcard and a computer, and get high quality recorded sound.
Audio Technica AT-2020 main features
- Rugged construction for durable performance
- Ideal for project/home-studio applications
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom-engineered low-mass diaphragm
- Cardioid polar pattern
The AT2020 sets a new standard of performance and quality in studio condenser microphones at this price level. Its low-mass diaphragm is custom made for extended frequency response and superior transient response. With a very low intrinsic noise level, it is perfectly suited to current digital recording equipment. This microphone offers a wide dynamic range, and easily holds high sound pressure levels. Its rugged construction is designed to last for years.
- One of the best quality / price ratios in side-address studio condenser microphone technology
- Ideal for "Project / home-studio"
- High sound pressure level and outstanding dynamic range make it a particularly versatile microphone
- Made to measure Ø16mm low-mass diaphragm, providing both wide frequency response and superior transient response
- Cardioid polar pattern improves isolation of desired sound source and a reduction of sound to the side and rear
- Screw fixture and swivel foot ensure secure mounting and facilitate accurate microphone positioning
- With its low operating noise, it is suitable for use with sophisticated recording equipment
Check out the optional suspension cradle, the excellent value
Citronic SMH 44
Element |
Fixed-charge back plate, permanently polarized condenser |
Polar Pattern |
Cardioid |
Frequency Response |
20 - 20,000 Hz |
Open Circuit Sensitivity |
-37 dB (14.1 mV) re 1V at 1 Pa |
Impedance |
100 ohms |
Maximum Input Sound Level |
144 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range |
124 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio |
74 dB, 1 kHz at 1 Pa |
Phantom Power Requirements |
48V DC, 2 mA typical |
Weight |
345g |
Dimensions |
6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter |
Output Connector |
Integral 3-pin XLRM-type |
Accessories Included |
Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |